Purchasing · supplier qualification

We buy consistency – lot after lot.

Stainless strip, resistance wire, magnesium oxide and brass, plus the terminals, beads, fittings and packaging behind an output of 20 million heating elements a year.

We look for suppliers who hold a specification, document it and can support OEM programmes in volume. This page sets out what we buy, what we require and how to apply.

From 1994 to 2008 Balçık was the distributor of Kanthal® resistance wires for Türkiye.

Coil of stainless steel strip ready for the BALÇIK TORMEC tube mill Stainless strip for our tube mill

What we buy

Six purchasing categories, one standard of documentation.

Direct materials go into every element and carry the strictest requirements. Indirect materials keep our rolling, filling and annealing lines running.

Flanges and terminal plates
Flanges & terminal plates
Brass fittings, nuts and bosses
Brass fittings & nuts
Brackets and mounting parts
Brackets & mounting parts
Insulating beads and seals
Insulating beads & seals
Wiring and small components
Wiring & small components

We are always open to competitive, high-quality and reliable alternative suppliers – in every category, from Türkiye and abroad.Apply now →

01 · Metals

Stainless strip and tube

  • Cold-rolled strip for welded tube: AISI 304, 321, 316L – bright-annealed, controlled thickness and edge condition
  • Welded and redrawn tube in grades and sizes outside our own tube mill’s range, sized for roll reduction
  • Incoloy® 800 and 825 strip and tube (UNS N08800 / N08825 or equivalent)
  • Copper tube for liquid-heating elements

02 · Resistance wire

FeCrAl and NiCr wire

  • Iron-chromium-aluminium (FeCrAl) wire in heating-element grades
  • Nickel-chromium wire, NiCr 80/20 and 60/15 types
  • Kanthal® distributor for Türkiye from 1994 to 2008 – we know resistance wire from both sides of the counter
  • Agreed resistance-per-metre tolerance, specified surface condition, spool type and weight

03 · Insulation

Electrical-grade MgO

  • Fused magnesium oxide powder with a specified particle size distribution
  • Standard and silicone-treated (moisture-resistant) grades
  • Consistent purity, loss on ignition and electrical resistivity at temperature

04 · Components

Flanges, fittings and terminals

  • Brass and stainless flanges, threaded bosses (BSP / NPT) and nuts, machined or forged
  • Terminal pins, sockets, cable lugs and threaded terminals
  • Stamped brackets and mounting plates

05 · Sealing

Beads and sealing compounds

  • PTFE and silicone insulating beads
  • Ceramic (steatite) beads
  • Silicone and epoxy sealing compounds, and materials for our STF sealing process

06 · Indirect

Packaging and consumables

  • Cartons, trays and dividers in customer-specific sizes
  • Hanging bags and labels for retail-ready product
  • Industrial gases, cutting oils and maintenance parts for rolling, filling and annealing equipment

Requirements

Ten requirements, applied by category.

Not every criterion applies to every category – a packaging supplier is not asked for an EN 10204 3.1 certificate. Every material that ends up in a heating element, however, must be fully documented.

Our customers’ auditors trace each element back to its inputs, and we inspect every incoming material lot before it reaches the line.

XRF analyser with the result screen of an alloy analysis Incoming inspection
RequirementWhat we expect
Quality managementISO 9001 certification preferred; otherwise a documented, auditable quality system with calibration records and corrective-action handling.
Material certificatesEN 10204 type 3.1 with every strip, tube and wire delivery; certificate of analysis with every MgO lot – values against the agreed specification.
TraceabilityHeat or batch number on every packaging unit, matching the certificate – so each element can be traced back to its raw-material lot.
Chemical complianceRoHS (2011/65/EU as amended by (EU) 2015/863) and REACH SVHC declarations backed by accredited-laboratory test reports, renewed when the candidate list or the material changes.
Initial samples (PPAP-style)Dimensional report against the drawing, material certificate, test results, process flow and control plan. Series deliveries start only after written sample approval.
Change controlNo change of material source, process, sub-supplier or production site without prior written notice and, where required, re-qualification.
DeliveryOn-time delivery against confirmed dates, correct quantities and labelling; capacity for call-off schedules and changing forecasts.
Conflict mineralsOrigin statement for tin, tantalum, tungsten and gold where relevant (brass alloys, solders, plating), following the OECD due-diligence guidance.
Environment and safetyCompliance with environmental and occupational safety law; energy and emission data for our carbon-footprint work.
Business ethicsNo child, forced or bonded labour (ILO core conventions); no bribes, kickbacks or improper gifts – our buyers accept nothing beyond token value; drawings, specifications and volumes stay confidential under NDA.

Qualification process

Six steps from application to approved supplier.

Approval is per item, not per company: a new grade or dimension goes through sample qualification and trial lots again.

  1. Application

    Company profile, product range, certificates and markets served – through the online application below or by e-mail to purchasing.

  2. Document review

    Certificates, RoHS/REACH declarations, a specimen 3.1 certificate and your change-control procedure. Gaps are discussed before samples.

  3. Sample qualification

    Laboratory tests plus a process trial: strip welded and rolled, wire coiled and filled, MgO compacted and measured at temperature.

  4. Trial lots

    Limited production lots under tightened incoming inspection and process monitoring.

  5. Approved supplier

    Entered in our ERP as approved for the specific material and specification.

  6. Annual evaluation

    Scored on quality (PPM, complaints), delivery, documentation, responsiveness and total cost.

How to apply

Send your documents to purchasing – not to sales.

Attach your company presentation, quality certificates and – for materials – a typical inspection certificate and your RoHS/REACH declaration. Please do not send price lists before the document review: we request quotations for defined specifications.

Purchasing

Materials, components and services

Raw materials, components, packaging and services – your first point of contact as a supplier.

Import purchasing

Suppliers outside Türkiye

Materials and components shipped from abroad, and the import documentation that goes with them.

Factory and deliveries

Kahramankazan, Ankara

Deliveries go to the plant unless otherwise agreed.

  • Fatih Mh. Turgut Özal Blv. No:50, 06980 Kahramankazan / Ankara, Türkiye
  • +90 312 814 51 20
  • Mon–Fri 08:00–18:00 (TRT, UTC+3)

You can also use the contact form with the subject “Supplier application”. Supplier contact data is processed under the Turkish Personal Data Protection Law – see our KVKK notice.

Supplier application

Apply online.

Tell us what you supply and attach your company profile and certificates. Your application goes to our purchasing and import teams at the same time, and you receive a copy by e-mail.

What do you supply?

Certifications

Your application goes to our purchasing and import team (sa@balcik.com · imp@balcik.com). You receive a copy by e-mail.

Qualify as a BALÇIK TORMEC supplier.

Send your company profile and certificates to purchasing. We review your documents first, then request quotations for the specifications we need.

Engineered and made in Ankara · since 1959

Turning electricity into trust since 1959.

Three generations of know-how, our own welded tube and brazing lines, an engineering team with its validation laboratory and a 100 % electrical test on every element – so the heat inside your product is the one thing you never have to worry about.

TOP

BALÇIK TORMEC · Become a Supplier

Become a supplier to BALÇIK TORMEC: what we buy (stainless strip, FeCrAl and NiCr wire, MgO, brass parts), quality and RoHS/REACH rules, how to apply.

BALÇIK TORMEC has designed and manufactured tubular heating elements since 1959 – founded in Ankara, and at its Kahramankazan plant since 2000 – series and custom production to your drawing, VDE-approved element families, ISO 9001:2015, exports to more than 60 countries.

Corporate · related pages